Acribond 125

ACRI-BOND 125 is a clear, thickened cement that can provide virtually bubble free joining. It is suitable for joining acrylic to acrylic, polycarbonate, HIPS, ABS and PVC. It leaves a clear finish on acrylic and provides very strong bonding. It has drying speed that nominate this adhesive to be the best for acrylic.

Contains

METHYLENE CHLORIDE 10-30%
TRICHLOROETHYLENE 30-60%

Instructions

Parts to be joined should fit without forcing and be clean. Apply adhesive with suitable applicator and assemble while parts are still wet. Press parts together in firm contact. ACRI-BOND 125 forms initial bond very quickly. Strength develops rapidly reaching full strength in 24 to 48 hours leaving about 20%of dry residue.

Recommended use

This adhesive has been design for bonding and laminating Acrylic to Acrylic. Also, shows good results bonding Acrylic to Polycarbonate, HIPS, ABS, PVC, PETG. Test before use for other plastic materials.

Selection Chart

Mixing charts

• ACRI-BOND 125 mixed with ACRI-BOND 105

  After some time in storage this product may becomes thicker and you can then add AB105 to thin it and make it flow again.

  

SDS

 SDS Download: Acribond 125