Acribond UV2046

ACRI-BOND UV2046 is developed for use in bonding a variety of plastic such as ABS, PC, PS, PVC and acrylic. Bond strength on some plastics even exceeds the strength of those substrates. ACRI-BOND UV2046 is a one-part, high viscosity and ultraviolet curable adhesive designed for applications where widely used in the substrate with larger gap, bonding, encapsulating, coating, sealing and a dry to the tough surface are desired.

Physical properties of ACRI-BOND UV2046

Characteristics of ACRI-BOND UV2046

1. Formulated to be flexible, maintaining fragile component integrity during thermal cycling.
2. Excellent mechanical properties for adhesion.
3. Widely used on adhesion between different plastics.

Mechancal Properties

Cure schedule

They are solvent free materials that cure in seconds when exposed to the 365-436nm UV light with the accumulated energy of 1,500-3,000mJ/cm2 at recommended curing time of 10-15 sec

Storing condition

ACRIBOND UV20146 should be kept without any possibility of light exposure. Uncured material must be protected from exposure to air or oxygen to maintain viscosity and stability during application. It has a six month minimum shelf life when stored in dark place below 250C in original, unopened containers. Opened containers must be sealed to prevent oxygen induced polymerization and to maintain viscosity.

Caution

For industrial use only. Avoid breathing vapors. Avoid contact with eyes and clothing. In case of contact, immediately flush with water for at least 15 minutes; for eyes, get medical attention. Wash clothing before reuse. Keep out of reach of children. Do not take internally. If swallowed, vomiting should be induced at once and a physician called.

SDS

 SDS Download: Acribond UV2046